Great combo of our C9007, 12V 12kV negative ion generator and a G21027, 12VDC 1.5Amp switching adapter plus a piece of heat shrink. To use simply cut off end plug on adapter, separate the 2 wires about 1". Now strip the insulation off 1/4" of each wire, cut heat shrink tubing in half, slip a small piece of tubing on each wire. Now solder the wire with stripe to the red lead and the wire without a stripe to the black lead of the ion generator. Now slip heat shrink over soldered joint and use heat from heat gun or solder iron to shrink tubing. Plug adapter into wall outlet for a continuous supply of negative ions. Special package price! A $17.95 value.
CAUTION DISCLAIMER: You should not buy this item unless you are familiar with working with high-voltages and should be careful to take all safety precautions when using this.